Haier HDP18PA User Manual - Page 14
Check, List for Wash, Process
![]() |
UPC - 688057190624
View all Haier HDP18PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Tips: • Always start with level "1 ". • Set on level "2" if spots appear on your dishware, • If dishware are not drying properly or spotted, adjust to the next higher level until they are spotless, As the rinse aid level become less, the size of the see through level indicator changes, as shown below. FrFull 3_4Fu3/4 Full 1i2 Ful/2 Full In Ful/4 Full - At this time you should refill to eliminate spotting Emp' Empty To add liquid rinse aid dispenser, follow the procedure below. 1) To open, turn the dispenser cap to a clear triangle symbol V and lift up, 2) Pour in rinse aid until liquid touches the indicated fill level. Note" Do not overfill and spill because it will cause overflow and foaming. 3) Once you finish pouring, replace the cap back by turning it to a dark triangle symbol •, 4) To avoid oversudsing, wipe off any spills with damp cloth. Warning: Dishwasher detergent is harmful! You must keep it in a safe place out of the children reach. Check List for Wash Process: 1. Make sure all items are loaded in the racks properly. 2. Pour in proper detergent into the detergent dispenser. 3. Close the door and latch safely. 4. Select the desired wash cycle and options. 5, Press "Start" button to start the wash process. 6, Select "Vented Dry" button if you want to dry after the wash cycle is finished. Note: To add or remove items after cycle starts, press the pause button and unlock the door latch and wait a few seconds until wash action has stopped. Open the door and let hot steam inside the dishwasher out. After the hot steam is completely released, you can now add or change items. Once you make your changes, close the door gently, lock the door latch and press "Start" button to resume the cycle. 13
![](/manual_guide/products/haier-hdp18pa-user-manual-56c960b/14.png)