Haier HDP18PA User Manual - Page 17
drain hose, water, one-way valve, Option - dishwasher reset
![]() |
UPC - 688057190624
View all Haier HDP18PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Understanding the Venting Process: • In this process, the hot steam from the dishwasher is being drawn into the drain pump through its vacuum force and the mix condensation of water and air is being discharged through the discharge hose from the back of the unit. TUB drain hose L __--/ water one-way valve Delay Start Option: Press "Delay Start" button to delay the starting time for a wash cycle. You can delay the starting time for a wash cycle between I to 9 hours. The machine will count down and start automatically at the pre-set time, Follow the steps below to delay start: I. Press the "Delay Start" Button to select between 1-9 hours. 2, Once you have set the hours to Delay Start, select the proper wash cycle and your options, Press the Start button to activate the process. The light of selected cycles and options will blink. 3, Close the door properly by making sure that door latch is locked. 4. The wash cycle will start automatically at the appropriate time, 5, To cancel, press On/Off button, wait approximately 30 seconds and reset. 16
![](/manual_guide/products/haier-hdp18pa-user-manual-56c960b/17.png)