Haier HDP18PA User Manual - Page 23
Dishwasher, not work, Dishware, glassware/flatware, cloudy, not cleaned, Dishes, not dry - electric drying not working
UPC - 688057190624
View all Haier HDP18PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Dishwasher does not work: • Check if the unit is plugged in, The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage, • Check if circuit breaker needs to be reset or if the fuse needs to be replaced, • Check if the unit is on "Off" mode. • Check if the door is open, You may have to close the door properly. Dishware and glassware/flatware and not cleaned: are cloudy • Use of old or poor detergent. You need to make sure that detergent is fresh, • The water may be hard in your area, You may need to install water softener. • Spray arms may be blocked, You may need to rearrange dishware and utensils. • Water pressure may be low, You may need to adjust the water pressure, Make sure it is between 20 to 120 (PSI). • Water temperature may be lower than what is recommended. (120 Degree F / 49 Degree C) You may need to adjust water regulator. • Overloading of dishware. You may need to rearrange or remove some dishware from the load, • May have selected wrong cycle, You may need to select proper cycle. Dishes are not dry: • Vented dry option is off. You need to check if vented dry option is "ON" position. • low water temperature, You may need to regulate water temperature to 120 Degree F / 49 Degree C, 22