Haier HL22XSL2 Product Manual - Page 10

Installation Connecting a computer How to connect A To get the best picture quality, adjust the VGA graphics card to 1024×768. B Use the TV's VGA or DVI (Digital Visual Interface) Audio IN port for audio connections, depending on your computer connector. •• If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of either VGA IN or HDMI IN to display the VGA on the TV. •• If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or HDMI; (the other mode is set to Plug and Play automatically by the TV.) C Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required. PC/DVI AUDIO IN PC IN 9*$ ,1 How to use A Turn on the computer and the TV. B Use INPUT on the remote control to select VGA or HDMI source. C Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA graphic card or consult the manufacturer of the VGA graphic card. Note RR Use a DVI cable. RR Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. RR The synchronization input form for Horizontal and Vertical frequencies is separate. YYResolution Mode Resolution VGA SVGA 640×480 800×600 XGA 1024×768 Frame frequency (Hz) 60Hz 60Hz 75Hz 60Hz 75Hz Cable TV Setup After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 A Select 3 or 4 with channel switch on cable box. B Tune the TV channel to the same selected output channel on cable box. C Select channels at the cable box or with the cable box remote control. VIDEO L -AUDIO- R L R ANT IN AV IN AUDIO OUT   EN-9 Haier LED HDTV