Haier HL22XSL2 Product Manual - Page 13

B Press VOL+/ ENTER button to enter the menu and CH+/- button to go up and down to select the desired option. C Press VOL+/ ENTER button to confirm and CH+/- button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired audio quality has been achieved. Function YYBalance:Press CH+/- button and VOL+/ENTER to confirm, then press VOL+/- to adjust the audio output between left and right speakers. YYBass:Press CH+/- button and VOL+/ENTER button to confirm, then press VOL+/- to increase or decrease the level of the lower-pitched sounds. YYTreble:Press CH+/- button and VOL+/ENTER to confirm, then press VOL+/- to increase or decrease the level of the higher-pitched sounds. YY SRS TS XT: To turn the simulated surround sound on or off. YY Equalizer: To adjust the equalizer Off /Rock /Pop /Live /Dance/ Techno /Classic and Soft. YY Speaker: To adjust the speaker on or off. YY SPDIF Type: To adjust the SPDIF output: Off /Dolby Digital and PCM. YY AVL: This will reduces the differences in volume level among broadcasters. YY Audio Only: Press VOL+/ENTER button to confirm, the following display will appear on the screen: Press VOL- to select OK, then press OK to confirm. The TV screen will be black and no picture , but the sound is still normal. Press POWER button to exit Audio Only mode OK Cancel You can press POWER button to reveal the picture on the screen. SAP Broadcasts Setup This TV can receive MTS stereo programs and SAP Operation (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to mono sound during stereo/SAP broadcasting. Stereo or SAP can be received in a Analog channel. A Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono, Stereoor SAP appear. If other languages are available on the digital signal, select them with the SAP button. B Press EXIT button to save and return to TV viewing. Channel Menu Options Channel menu will appear in main menu only in TV mode. A Press MENU button and CH+/- button until the following menu appears on the screen. Video Audio Channel Tuner Mode Channel Scan Channel Skip Channel Labels Time Shifting Mode Antenna On Function Lock Channel CH+/VOL+/- Select EXIT Back B Press VOL+/ ENTER button to enter the menu and CH+/- button to go up and down to select the desired option. C Press VOL+/ ENTER button to confirm and VOL+/- button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired audio quality has been achieved. Function YY Tuner Mode:Press VOL+/ENTER button to select Haier LED HDTV EN-12