Haier HLTD500AGW User Manual - Page 13
Gas Dryer
View all Haier HLTD500AGW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GAS DRYER ELECTRICAL SUPPLY REQUIREMENTS WARNING The gas dryer must be plugged into a properly grounded 3-wire, single phase, 120 volt, 60Hz, AC-only electrical outlet, fused with a 15-amp time-delay fuse or circuit breaker. r The dryer is equipped with a power cord that has a 3 prong plug. Do not cut or remove the grounding prong from the power cord. r The power cord must be plugged into a mating, 3 prong outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, contacted a licensed electrician to have one installed. r If you are not sure if your outlet is properly grounded, contact a licensed electrician. r Do not use a 3 prong plug adapter. r Do not use an extension cord. 11
11
GAS DRYER
ELECTRICAL SUPPLY REQUIREMENTS
WARNING
The gas dryer must be plugged into a properly grounded 3-wire, single
phase, 120 volt, 60Hz, AC-only electrical outlet, fused with a 15-amp
time-delay fuse or circuit breaker.±
The dryer is equipped with a power cord that has a 3 prong plug. Do not cut or
remove the grounding prong from the power cord.
The power cord must be plugged into a mating, 3 prong outlet, grounded in
accordance with local codes and ordinances. If a mating outlet is not available,
contacted a licensed electrician to have one installed.
If you are not sure if your outlet is properly grounded, contact a licensed
electrician.
Do not use a 3 prong plug adapter.
Do not use an extension cord.