Haier HLTD500AGW User Manual - Page 18
Step By Step Instructions
View all Haier HLTD500AGW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
STEP BY STEP INSTRUCTIONS INSTALLING YOUR DRYER We recommend that your new dryer be installed by a qualinjed appliance technician. If you feel that you have the skills to install the dryer, please read the installation instructions thoroughly before installing. CAUTION: If, after completing these steps, you are unsure that the dryer is properly installed, contact a qualinjed appliance technician. STEP 1 - UNPACK THE DRYER 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the dryer accessories inside and outside. 2. Inspect and remove any remains of packing, tape or printed materials before using the dryer. WARNING To avoid danger of suffocation, keep plastic bag and other packing material away from babies and children. Do not use this bag in cribs, carriages and playpens. The plastic bag could block nose and mouth and prevent breathing. This bag is not a toy. STEP 2 - ATTACH A POWER CORD TO THE DRYER (ELECTRIC DRYER - U.S. ONLY) 1. Remove the screw securing the terminal block access cover, located on the back of the dryer's upper corner. Terminal Block Access Cover A C Hole in Strain Relief Mounting Bracket Access Cover Screw B 2. Insert a UL listed strain relief into the mounting bracket hole. Position the strain relief so that one tab is pointing up and one tab is pointing down. Tighten the strain relief screws just enough to hold the two halves together. 16