Haier HWM80-68B User Manual - Page 9

Connection between the water inlet hose jointer and the water inlet hose 1. Push down the slider. Plug the water inlet hose into the jointer. 2. Hang the lock lever onto the jointer. Release the slider till a click sound is heard. Locking level The water inlet hose jointer Slider Check the connection between the water inlet hose jointer and the water faucet 1.Swing the hose gently to check if it is fastened stably. 2.After installation, open thefaucet to check ifit leaks water. 3.Do not bend thehose by force. 4.Each time before using,please check if theconnection between the water inlethose jointer and thewater faucet, and the installation ofthe water inlet hoseisfirm, so as to avoid dropping owingto improper installation. Dismount the water inlet hose 1. Close the water faucet. 2 .Press the lock lever and push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the water inlet hose jointer can remain on the faucet to avoid damaging the fastening screws. Lock level Slider 7