Haier L32F6 Owners Manual - Page 21

How to use the password function Press H. LOCK, the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys; if the password is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter a password again. If there is no operation for a few seconds, the display will automatically disappear. The Lock Set menu is as follows: Return ❖❖ Change password 5 6 After entering the Lock Set menu, press / to select the Change Password option, and then press 3/4 to display the Change Password menu, afterwards enter a new 4-digit password by pressing numerical keys and repeat entering this password once, and finally select the option to be confirmed and press MENU to confirm, indicating the successful change of password. If the user does not want to change the password in halfway, he may press MENU to exit from this menu. Note The initial password is 0000, and the password setting will not be changed after executing the Unlock option. ❖❖ Tuning Lock 5 6 Press / to select the Tuning Lock option, and then press 3/4 to set ON or OFF. (If set ON, the Tuning Menu is not available in TV mode. To make any operation related to the Tuning Menu, it is necessary to enter the Lock Set menu to set Tuning Lock OFF or execute the Unlock option.) ❖❖ Preset Source Preset Source may be set as Off, TV, AV, Component, HDMI, S-video,PC and USB. When the Preset Source is set as TV, after entering the Preset Channel menu, press 3/4 to select the preset channel, and the Basic Receiving and Playing Operations channel will be forcibly switched to the preset one upon turning the TV on; when the Preset Source is set as other signal sources, the TV will be forcibly switched to the preset source upon turning on. For example, when the Preset Source is set as YPbPr/YCbCr, the TV will be switched to YPbPr/YCbCr upon turning on; when set as OFF, the preset function will be closed. ❖❖ Preset Channel Only when the Preset Source is set as TV can the Preset Channel option be available. Press 3/4 to select preset channels from 0-255. ❖❖ Source Lock This function is used to prohibit watching a program 5 6 from various external inputs, e.g. AV and PC, etc. Press / to select a certain option, and then press 3/4 to set an external input lock ON or OFF. If an external input lock is set ON, after entering this mode, the screen will display blue background with muting and a prompt Source Lock; during Source Lock prompt, Source Lock will remain if there is no other display on the screen. To watch a program from a locked external input, just enter Source Lock submenu to set corresponding status as OFF or execute the Unlock option in the Lock Set menu. ❖❖ Child Lock 5 6 Press / to select the Child Lock option, and then press 3/4 to set ON or OFF. If set ON, this control key will not respond, and the screen will display Child Lock when the key is pressed; if no other operation is made, the display will automatically disappear later. To resume Child Lock function, just enter the Lock Set menu to set Child Lock OFF or execute the Unlock option. ❖❖ Max Volume 5 6 Press / to select the Max Volume option, and then press 3/4 to freely adjust the max volume within the range of 0~100. After finishing the setting, the max volume in the Volume menu will not exceed the preset max volume; for example, if the preset max volume is 30, the volume in the Volume menu can not be increased any longer upon reaching 30; if the preset max volume is less than the value in the Volume menu, the latter will decrease along with the decrease of preset max volume. ❖❖ On Volume 5 6 Press / to select the Power on Volume option, and then press 3/4 to freely adjust the volume within the range of 0~100. ❖❖ Unlock LCD television Owner's Manual 21