Haier L32F6 Owners Manual - Page 25

Specification - appliances

Page 25 highlights

No picture, no sound Turn onthe power supply; Properly plug theTV setto the powersocket; Check to see if the power cable of other appliance is plugged in the TV set. Make sure that the power cable of the TV set is properly connected. Problem Possible remedies Good picture, no sound Depress the volume button; Check out theaudio frequency input signals. Failure of remote controller Check to see if the remote controller display receiving window are blocked by other objects and if batteries are properly loaded. No color, weak color or poor picture Designate the item of color from the Picture menu and depress the volume button; Keep the display and VCR separate a reasonable space; Activate some functions to store picture brightness; Make sure that the display and signal source are available and turned on. Excessive brightness Adjust brightness or contrast. or darkness Picture too big or small One speaker failure Slight sound from display Adjust the setup of sizes. Balance the sound in the menu. It is a normal phenomenon. Note RR Do not leave the television with static picture in an extended period as it may result in residual image on your television screen. Note RR Production of the screen requires high and precision technologies. However, there might be some dank or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen maybe affected and a muffled Specification/Formatl sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited warranty. Specification Basic specification and parameter Power ~ 150-240V 50/60Hz Color System PAL, NTSC, SECAM, NTSC4.43 Stand-by Consumption D/K, B/G, I, M Video Input USB, AV, Component, HDMI, S-Video , PC, Environmental condition Operating temperature range: +5°C - +35°C Operating humidity range: 20%-80% Storage Temperature: -15°C~+45°C Storage Humidity: 5%-90%, non-condensing If the storage temperature is lower than 0 °C, please first lays the machine aside after in the operating temperature environment carries on restores 2 hours, then electrifies the use again, protects your television not to receive the damage. Accessories Owner's manual x1 Remote Control x1 Alkaline battery x2 (This is only available for certain models,please refer to actual products.) Product main size (contain stand) MODEL Power Consumption L26F6 90W L32F6 115W L42F6 170W Net Size(LxWxH) 658x200x488mm 798x230x575mm 1020x300x697mm Net Weight 7.8Kg 10Kg 17.5Kg LCD television Owner's Manual 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

Specification/Formatl
LCD television Owner’s Manual
25
No
picture,
no sound
Turn onthe power supply; Properly
plug theTV setto the powersocket;
Check to see if the power cable of other
appliance is plugged in the TV set.
Make
sure that the power cable of the TV set
is properly connected.
Problem
Possible remedies
Good
picture,
no sound
Depress the volume button;
Check out theaudio frequency input signals.
Failure of
remote
controller
Check to see if the remote controller
display receiving window are blocked
by other objects and if batteries are
properly loaded.
No color,
weak color
or poor
picture
Designate the item of color from the
Picture menu and depress the volume
button; Keep the display and VCR
separate a reasonable space; Activate
some functions to store picture
brightness; Make sure that the display
and signal source are available and
turned on.
Excessive
brightness
or darkness
Adjust brightness or contrast.
Picture
too big or
small
Adjust the setup of sizes.
One
speaker
failure
Balance the sound in the menu.
Slight
sound
from
display
It is a normal phenomenon.
Note
Do not leave the television with static picture in an
R
extended period as it may result in residual image
on your television screen.
Note
Production of the screen requires high and precision
R
technologies. However, there might be some
dank or bright (red, blue or green) spots, or some
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea
level where the air pressure is below 750hpa, the
picture on the screen maybe affected and a muffled
sound might be produced. These phenomena
might happen in the area 1,500 meters above the
sea level. This is resulted from difference between
air pressures inside and outside the display. This is
not a defect covered by the limited warranty.
Specification
Basic specification and parameter
Power
~ 150-240V
50/60Hz
Color System
PAL, NTSC, SECAM, NTSC4.43
Stand-by
Consumption
D/K, B/G, I, M
Video Input
USB, AV, Component, HDMI,
S-Video , PC,
Environmental
condition
Operating temperature range:
+5°C - +35°C Operating
humidity range: 20%-80%
Storage Temperature:
-15°C~+45°C
Storage Humidity: 5%-90%,
non-condensing
If the storage temperature is
lower than 0 °C, please first
lays the machine aside after
in the operating temperature
environment carries on restores
2 hours, then electrifies the use
again, protects your television
not to receive the damage.
Accessories
Owner’s manual
x1
Remote Control
x1
Alkaline battery
x2
(This is only available for certain
models,please refer to actual products.)
Product main size (contain stand)
MODEL
Power
Consumption
Net Size(LxWxH)
Net Weight
L26F6
90W
658x200x488mm
7.8Kg
L32F6
115W
798x230x575mm
10Kg
L42F6
170W
1020x300x697mm
17.5Kg