Haier XQB40-F Use and Care Guide - Page 2

IMPORTANT SAFEGUARDS Warning: Read all instructions before using this appliance. When using this appliance,always exercise basic safety precautions,including the following: 1) Use this appliance only for its intended purpose as described in this use and care guide. 2) This washing maching must be properly inctalled in accordance with the installation instructions before it is used. See grounding instructions in the installation section. 3) Never unplug the machine by pulling on the power cord.Always grip plug firmly and pull straight out from outlet. 4) Repair or replace unmediately,all electric service cords that have become frayed or otherwise damaged.Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end. 5) Do not wash articles that have been previously cleaned in,washed in, soaked in,or spotted with gasoline,dry cleaning solvents,other flammable or explosive substances. These substances give off vapors that could ignite or explode.Do not add any of these substances to washing water to aid in cleaning. 6) Do not reach into machine if the tub,agitator.or drum is moving. 7) Do not put your hand(s) under the machine during operation.Movin2 parts may cause injury to your hand(s). 8) Do not install or store machine where it will be exposed to weather direct sunlight,freezing temperatures or near radiator or heat source. 9) Do not tamper with controls or circuitry 10) Do not repair or replace any part or attempt any servicing unless it is specifically recommended in this use and care guide. 11) Do not use hot water that exceeds 131F (55° C) in temperature. 12) Do not overload your electrical outlet.Machine should be plugged dorectly into wall without the use of outlet strips or multi-plug adapters. 1