Haier XQB40-F Use and Care Guide - Page 8
maximum, energy, efficiency, water, recommended, Cycle, Selection, Setting, Rinse, Total, Heavy,
View all Haier XQB40-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Water Level Selection This function is pretty self explanatory. If you are washing only a few garments, set the level to "LOW". "Medium" for more garments and High" for a rull load. If after you have selected a setting and you want to add more water, turn the lznib to the "reset" position and then adjust the knob to a higher position. Once the proper water level is obtained, return the knob to its original position. 2.1/2 Water Temperature You can choose the water temperature for your wash according to the list. Do not use extreamly hot water ( above 131`: F ) as it may damage hoses and machine. Normal Wash Cycle Hot wash (120-131' F ) white items.diaper, underclothing. and heavily soiled, colorfast items. Warm wash (85-105° F ) most items. Cold wash (60-75° F) only bright colors with light soil. ,,,ktsir STOP FTE4 er ir•-4,.* • •• • • Haier FULLY-AUTOMATIC XL:1640-F • • Q. • • Rinse: use of cold water is recommended. srop • 0 . JIINSHCE, PW.ON 1. Water temperature and water levels will effect energy efficiency. 2. For maximum energy efficiency use of cold water is recommended LOW MEDIUM • Si HIGH Mt WADER LEVEL 3. Selecting Wash Cycle Please notice that the control panel behind the operation dial has different settings to accommodate your laundering needs. This control is also very self explanatory. The chart below illustrates how the machine will function according to your selection. Please note that if you select "Wash", the machine will wash only. It will not spin to extract water from garments. Wash Cycles XQB40-F Cycle Selection Knob Setting Heavy Wash Normal Wash Wash (only) Wash Time 12 Min. 6 Min. 6 Min. Rinse Twice Once Spin Time 6 Min 4 Min Total Time Appx. 32 Min Appx. 18 Min Appx. 6 Min • Push in knob to turn • Only turn knob clockwise. • Pull knob out to start. • Push knob in to stop. • Never turn knob once cycle is in progress. To adjust setting after cycle has begun, push in knob (this stops machine), adjust setting (clockwise only )and pull knob back out to restart. IMPORTANT: To avoid possible problems, please try to keep water and wet laundry away from control panel and knobs. 7