Harman Kardon ADAPT PLUS Owners Manual Multilingual - Page 13

BUTTONS AND CONNECTORS BUTTONS AND CO NNEC TO R S Link Button Pressing the Link button adds this speaker to a different speaker group. Grouped speakers all play the same music. For example, if you are listening to music in the Bedroom, you can walk to the Kitchen and press the Link button on the speaker in the Kitchen. The Kitchen will join and begin to play the same music as the Bedroom. Pressing multiple times will switch between different groups on the network. Pressing the Link button for 5 seconds will enable Party Mode, which sends the same music to every speaker in the house. Source Button Pressing the Source button cycles the currently active music source in this room between AUX-in, Optical, and HDMI TV for the Omni Bar+ or AUX-in, Optical, and Bluetooth for the Omni Adapt+. If you are currently streaming audio over Wi-Fi, it will switch away from Wi-Fi to one of these other sources. Switching to one of these sources will send the same music that you hear on this speaker to all the other speakers in the same group. On the Omni Bar+, this button will light up white when the active source is HDMI TV, green when the active source is AUX-in, or amber when the active source is Optical. Bluetooth Button Press the Bluetooth Button to enter Bluetooth pairing mode on the Omni Bar. This button will also switch the currently active source to Bluetooth. Note that on the Omni Adapt+, you must press the Source button for 3 seconds to enter Bluetooth pairing mode instead. Play/Pause Button The Play/Pause button pauses or resumes music playback on Bluetooth or any of the Wi-Fi sources, including Spotify Connect and Chromecast built-in. AUX-in audio must be paused from the external audio source. 13