Harman Kardon ADAPT PLUS Owners Manual Multilingual - Page 19

SPEAKER SETUP Set Location 2. The next step of the speaker setup process is to select where this speaker will be used. Select one of the predefined rooms, like Living Room or Bedroom. If you wish to use a different room name than one shown here, you may customize it in the next step, so select the icon you wish to associate with this room instead. 3. After selecting a room name, you will be able to customize the room with a specific color. There are twelve different colors to choose from. This color will always be associated with this room while using the app to make it easier to differentiate between rooms. You may also change the room name by tapping on the name and typing a new name. Customize Please set color and name. Study Configuration How many speakers will you use in Study One Speaker Two speakers (Stereo L/R) Omni Bar+ Adapt+ Choose product Please choose your Soundbar setup Soundbar setup 2.1 Soundbar/Subwoofer Soundbar setup 5.1 Soundbar/Subwoofer/Rear Right / Rear Left Speaker 4. Select the speaker type now: Omni Bar+; or Adapt+. The next step is to select how many Omni+ speakers you wish to Next use in this room. If you wish to use the Omni Bar+ alone, select Soundbar setup 2.1, or select Stereo if you wish to use your Omni Adapt+ alone. For a wireless 5.1 surround system using the Omni Bar+, select Soundbar setup 5.1 or Wireless 5.1 Surround Speaker using the Adapt+. Note that for a wireless 5.1 surround system, you must use a 5GHz Wi-Fi connection. To set up Omni Bar+ as a 5.1 surround system, refer to page 21. After this, you will connect the speaker to your home network. The process for this differs between Android and iOS. iOS Cancel Accessory Setup Next This accessory will be set up to join "CEC VPN 5GHz". NETWORK CEC VPN 5GHz Show Other Networks... Accessory Name HK_Omni_50+_Setup... Omni Bar+ and Omni Adapt+ use a new iOS feature named Wireless Accessory Configuration, which is the easiest way to set up Wi-Fi for iOS users. Each speaker you have plugged in to AC power will appear on this screen. Select one of the speakers and an iOS system popup will appear, showing you a list of Wi-Fi networks in range. Choose the Wi-Fi network you want to connect this speaker to, then press Next. This should normally be the same network your phone is connected to, which will appear as the default option. Note: If you don't see the correct Wi-Fi network, make sure that the speaker is in range of the Wi-Fi router or access point. 19