Harman Kardon AVR80 Owners Manual - Page 11

AVR80 manual 11/01/98 13:01 Side 5 Front Panel Information Display 5 ENGLISH ¡ "Visual" Indicator: These indicators display which Video source is being fed to the video monitor output. ™ Test: This indicator flashes when the output levels are being set using the built in test signal generator. £ Memo: This indicator flashes when the Memo button is pressed when entering presets and other information into the tuner's memory. ¢ Auto: This indicator signifies that the Automatic Receiving mode (Stereo/ Mono) is in use for FM broadcasts. ∞ Tuned: This indicator lights when an AM or FM station is properly tuned and locked. § Stereo: This indicator lights when an FM station is broadcasting in stereo. ¶ Volume indication: The last two indicators on the information display indicate the volume level. Note that 0dB is the reference level, not an indication that there is no output. • Tuner Frequency Indication: When the tuner is in use, the main Information Display will show the preset channel number, if any, the frequency band and the station frequency. Indicators at the right side of the display show kHz when an LW or AM station is tuned or MHz when an FM station is tuned. ª Main Information Display: This ten digit display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of the unit's operation. , Multi: This indicator signifies that the AVR80 is sending a program source to a remote room location. Note that it may be illuminated even when the unit is "off" in the main listening room, signifying that operation continues at another location. When a remote command is being received via the Multi IR connection, this indicator will flash. ⁄ Mode Status: These indicators display the currently selected surround mode. ¤ DISP: This indicator lights when the FL display has been turned off using the Display button ) to remind you that the unit is still turned on. ‹ Copy Indicators: The TAPE COPY indicator lights when an input other than the current source has been selected to copy Tape 1. The COPY1 VCR indicator signifies that the input to VCR 1 is other than the currently selected source. › P-Scan: This indicator flashes when the stations programmed into the tuner memory are being automatically reviewed. fi Auto Memo: This indicator flashes when the tuner is automatically scanning for stations and entering them into the preset memory. fl Signal Level Indication: This is a visual indication of the strength of a radio station signal. The more bars visible, the stronger the station.