Harman Kardon AVR80 Owners Manual - Page 23

AVR80 manual 11/01/98 13:01 Side 17 System Configuration 17 ENGLISH 6. Press SELECT r to move to the next screen, SET U P MENU 1. (Figure #2). 7. The first item to be set is the Center Channel Mode. The on screen > cursor will already point toward this option when you select the menu. Press the ‹ or › buttons q to choose one of these center channel options by moving the cursor: LARGE: Choose this option if you are using either a THX Certified speaker system with a subwoofer or large size full range center channel speaker. SMALL: Choose this option if the center speaker is small sized. NONE: Choose this option if you are not using a center channel speaker. 8. When the center channel speaker selection is complete, press the ¤ button q to move to the next option. Note that the on screen > cursor will move down to SUBWOOFER. 9. Press the ‹ or › buttons q to choose one of these options: ON: Choose this option if a Subwoofer is installed, getting its signal from 'subwoofer' jack µ . OFF: Choose this option if no Subwoofer is present. 10. Press ¤ q once and then SELECT r to move to SET UP MENU 2 to continue the set-up procedure. (Press ¤ twice and then SELECT if you prefer to return to the MAIN MENU.) 11. At SET UP MENU 2 (Figure #3) you are able to establish settings for multiroom operation and lock the control settings. You may skip these menus by pressing ¤ q until the on screen > cursor is next to RETURN TO MAIN MENU and pressing SELECT r. 12. If multiroom operation will be used, the first option enables you to select the method used for volume control. With the > cursor pointing to MULTI RM VOL press the ‹ or › buttons to choose one of these options: VARIABLE: Choose this option if the volume control in the remote rooms will be controlled by a remote control and a sensor connected to the AVR80 via the MULTI IR input on the rear panel. FIXED: Choose this option if there is no remote control link to the remote rooms, or if you wish to have the volume in these rooms remain at a fixed, constant level. 13. When you have made your selection, press ¤ q to move to the next option, SET LEVEL. Press the ‹ or › buttons q to set the volume in accordance with the option chosen in the previous menu: a. If you selected VARIABLE Volume Set, this option selects the volume level at the remote rooms when the system is first turned on in those locations. b. If you selected FIXED Volume Set, this is the level that will remain constant in the remote rooms. MAIN MENU INPUT SELECTOR REC OUT SELECTOR SURROUND MODE TEST TONE MULTI ROOM SEL:OFF SET UP MENU MENU OFF Figure 1 SET UP MENU 1 CENTER MODE >LARGE SMALL NONE SUB WOOFER ON OFF GO TO SET UP MENU 2 RETURN TO MAIN MENU Figure 2 SET UP MENU 2 MULTI RM VOL >VARIABLE FIXED SET LEVEL XXdB SET UP RETURN LOCK LOCK UNLOCK TO MAIN MENU Figure 3 TEST TONE OFF >ON Figure 4