Harman Kardon AVR80 Owners Manual - Page 32

AVR80 manual 11/01/98 13:01 Side 26 On Screen Display 26 ENGLISH Input Selection When the source input is changed, this message will appear (Figure #7). The top line is the audio input source, the bottom line is the video input source. Remember, when choosing an input, select the video source first, and then the audio source if a split input/simulcast listening session is desired. Note that when the TAPE COPY function is engaged, the AUDIO source is displayed in reverse video. Tape Copy Input Selection When an input is selected for either TAPE1 or VCR1 record source by the front buttons  Ò, the choices appear as a message with the TAPE1 information on the top line and the VCR1 information on the bottom line. (Figure #8) Surround Output Levels To obtain a status screen with the outputs for each individual channel, press the SPEAKER button v on the remote. A summary will appear for ten seconds. (Figure #9) Master Volume When the volume is changed, a horizontal scale will briefly appear at the bottom of the screen with the volume level. (Figure #10) Mute When the unit is placed in audio mute, the word MUTE will appear in the upper right corner of the screen as a reminder that the volume has been cut. (Figure #11) On Screen Display Function If you do not wish to have the on screen displays appear, press the SCREEN DISPLAY button s on the remote until OSDOFF appears on the display. A reminder message will appear on the screen for a few seconds (Figure #12), and the displays will then be canceled until they are once again activated. NOTE: Additional display messages appear as a part of the Multiroom system. These are described in the portion of this manual dealing with that topic. Using The On Screen Menus for System Control Besides conveying status messages, the on screen display system may also be used as a means of controlling the operation of the unit. To operate the control system, always start by pressing SELECT r on the remote to bring up the Main Menu. (Figure #1). Then, use the up/down navigational arrow keys ⁄ and ¤ q to move the cursor. Press SELECT r to choose a menu, and then use the left/right navigational arrow keys ‹ and › q to view the choices in that current option. Finally, when the desired choice appears, press SELECT r to enter the choice and return to the MAIN MENU. To exit from the Menu Control System, press ¤ q until the on screen > cursor is pointing to MENU OFF and press SELECT r. MASTER VOLUME || Figure 10 MUTE Figure 11 ON SCREEN DISPLAY OFF Figure 12 INPUT SELECTOR >AUDIO *LD* VIDEO *LD* TAPE MONITOR ON OFF RETURN TO MAIN MENU Figure 13 REC OUT SELECTOR >TAPE *TUNER* VCR1 *LD* RETURN TO MAIN MENU Figure 14