Harman Kardon AVR80MKII Owners Manual - Page 18

External, Audio, Power, Amplifier, Connections

Page 18 highlights

Installation, Set Up & Configuration 16 External Audio Power Amplifier Connections Using the PRE OUT jacks (1), connections may be made to external power amplifiers. To make these connections, remove the jumpers between PRE-OUT and MAIN IN, and save them for future use. Connect the PRE-OUT of the channels to be connected to external amplifiers to that amplifier's inputs. Volume will still be controlled by this receiver. When an external amplifier is used for the front channels, this receiver's rear channel outputs and a passive (nonpowered) subwoofer may be connected to this unit's internal amplifier for higher power output. To make these connections, follow the diagrams on this page. Using short RCA to RCA jumpers, connect the left and right SURR PRE-OUT jacks to the left and right FRONT MAIN IN jacks. A subwoofer may be connected by connecting the SUBWOOFER PRE OUT to the CENTER MAIN IN. If these connections are used, changes must be made to the speaker outputs. Connect the left and right surround speakers to the speaker terminals labeled FRONT DO and the passive subwoofer to the speaker terminals labeled CENTER Q. AC Power Connections This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high current draw equipment such as power amplifiers. The SWITCHED 0 outlet will receive power only when the unit is on. This is recommended for devices that have no power switch, or a mechanical power switch that may be left in the "ON" position. External Power Amplifier L R CENTER MAIN IN PRE OUT FRONT SURR. O CENTER The UNSWITCHED 41,1 outlet will receive power as long as the unit is plugged into a powered AC outlet. SUB GOFER Subwoofer Finally, when all connections are complete, plug the power cord into a nonswitched 120 volt AC wall outlet. Note that the ring surrounding the Power Switch m will turn amber. You're almost ready to enjoy the AVR8011! Left Surround Speaker 0 0 .O CENTER 80H Right Surround Speaker SURR BOHMS 9T- O FRONT OHMS SPEAKERS NOTE: When external power amplifiers are used, the center channel speakers should receive at least as much amplifier power as the front left and right speakers.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

Installation,
Set
Up
&
Configuration
16
External
Audio
Power
Amplifier
Connections
Using
the
PRE
OUT
jacks
(1),
connec-
tions
may
be
made
to
external
power
amplifiers.
To
make
these
connections,
remove
the
jumpers
between
PRE
-OUT
and
MAIN
IN,
and
save
them
for
future
use.
Connect
the
PRE
-OUT
of
the
chan-
nels
to
be
connected
to
external
ampli-
fiers
to
that
amplifier's
inputs.
Volume
will
still
be
controlled
by
this
receiver.
When
an
external
amplifier
is
used
for
the
front
channels,
this
receiver's
rear
channel
outputs
and
a
passive
(non
-
powered)
subwoofer
may
be
connected
to
this
unit's
internal
amplifier
for
higher
power
output.
To
make
these
connec-
tions,
follow
the
diagrams
on
this
page.
Using
short
RCA
to
RCA
jumpers,
connect
the
left
and
right
SURR
PRE
-OUT
jacks
to
the
left
and
right
FRONT
MAIN
IN
jacks.
A
subwoofer
may
be
connected
by
connecting
the
SUBWOOFER
PRE
OUT
to
the
CENTER
MAIN
IN.
If
these
connections
are
used,
changes
must
be
made
to
the
speaker
outputs.
Connect
the
left
and
right
surround
speakers
to
the
speaker
terminals
labeled
FRONT
DO
and
the
passive
sub
-
woofer
to
the
speaker
terminals
labeled
CENTER
Q.
NOTE:
When
external
power
amplifiers
are
used,
the
center
channel
speakers
should
receive
at
least
as
much
amplifier
power
as
the
front
left
and
right
speakers.
AC
Power
Connections
This
unit
is
equipped
with
two
accessory
AC
outlets.
They
may
be
used
to
power
accessory
devices,
but
they
should
not
be
used
with
high
current
draw
equipment
such
as
power
amplifiers.
The
SWITCHED
0
outlet
will
receive
power
only
when
the
unit
is
on.
This
is
recommended
for
devices
that
have
no
power
switch,
or
a
mechanical
power
switch
that
may
be
left
in
the
"ON"
position.
The
UNSWITCHED
41,1
outlet
will
receive
power
as
long
as
the
unit
is
plugged
into
a
powered
AC
outlet.
Finally,
when
all
connections
are
com-
plete,
plug
the
power
cord
into
a
non
-
switched
120
volt
AC
wall
outlet.
Note
that
the
ring
surrounding
the
Power
Switch
m
will
turn
amber.
You're
almost
ready
to
enjoy
the
AVR8011!
MAIN
IN
PRE
OUT
FRONT
External
Power
Amplifier
L
R
CENTER
SURR.
O
CENTER
Left
Surround
Speaker
0
SUB
GOFER
.O
CENTER
80H
Subwoofer
0
SURR
BOHMS
O
Right
Surround
Speaker
SPEAKERS
FRONT
OHMS
9T-