Harman Kardon AVR80MKII Owners Manual - Page 22

Power, Screen, Display, Select

Page 22 highlights

System Configuration 20 TV or Projection Screen Left Fro. Speaker Center Front Speaker R4:a' Optional Rear Wall Mounting The distance between the left and right speakers should be equal to the distance from the seating position to the viewing screen. You may also experiment with placing the left and right speaker slightly forward of the center speaker. I At least 6 inches from ceiling At least 2 feet speakers so that they are aimed at ear height when you are seated in the listening position. Using these guidelines, you find that it takes some experimentation to find the correct location for the front speakers in your particular installation. Don't be afraid to move things around until the system sounds correct. Optimize your speakers so that pans across the front of the room sound smooth, and that sounds from all speakers appear to arrive at the listening position at the same time without delay from the center speaker as opposed to the left and right speakers. Note that some THX Certified center channel speakers must he placed vertically, while others may be placed horizontally. Consult the instruction manual accompanying your center speaker for the correct mounting position. Surround speakers should be placed on the side walls of the room, at or slightly behind the listening position. The center of the speaker should face into the room with the active speaker drivers pointing towards the front and rear of the room. The speakers should be located so that the bottom of the cabinet is at least two feet higher than the listeners' ears when in the desired area. If side wall mounting is not practical, the speakers may be placed on a rear wall, behind the listening position. Again, they should be located so that the bottom of the cabinet is at least two feet higher than the listeners' ears. The speakers should be no more than six feet behind the rear of the seating area. Subwoofers produce non-directional sound, so they may be placed almost anywhere in a room. Subwoofer placement is highly influenced by room size and shape, and the type of subwoofer used. Follow the instructions of the subwoofer's manufacturer, or experiment with the best location for a subwoofer in your listening room. Once the speakers have been placed in the room and connected, the final step is to enter the configuration information and balance the speaker output levels. Before proceeding further this is a good time to review the installation section of the manual to make certain that all connections are properly male. System Settings 1. Plug the unit into an AC wall outlet and press the Power button on either the front panel m or the remote 0. Note that the ring surrounding the front panel switch will turn green, and the front panel display will illuminate. 2. Run on the TV connected to the receiver. Select the appropriate video input on the TV. NOTE: Although the unit will switch "S" video signals, the on screen menus control system is NOT visible on the S video output. 3. Press the SCREEN DISPLAY (E) button, and then press any of the navigational arrow buttons or the SELECT iD button on the remote to bring the MAIN MENU up on your video screen. (Figure #1) 4. Press the y button five times until the on screen > cursor is pointing to SET UP MENU. 5. Press SELECT E to move to the next screen, SET UP MENU 1. (Figure #2).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

System
Configuration
20
Left
Fro.
Speaker
TV
or
Projection
Screen
Center
Front
Speaker
Optional
Rear
Wall
Mounting
R
4
:a'
The
distance
between
the
left
and
right
speakers
should
be
equal
to
the
distance
from
the
seating
position
to
the
viewing
screen.
You
may
also
experiment
with
placing
the
left
and
right
speaker
slightly
forward
of
the
center
speaker.
I
At
least
6
inches
fr
om
ceiling
At
least
2
feet
speakers
so
that
they
are
aimed
at
ear
height
when
you
are
seated
in
the
listen-
ing
position.
Using
these
guidelines,
you
find
that
it
takes
some
experimentation
to
find
the
correct
location
for
the
front
speakers
in
your
particular
installation.
Don't
be
afraid
to
move
things
around
until
the
system
sounds
correct.
Optimize
your
speakers
so
that
pans
across
the
front
of
the
room
sound
smooth,
and
that
sounds
from
all
speakers
appear
to
arrive
at
the
listening
position
at
the
same
time
with-
out
delay
from
the
center
speaker
as
opposed
to
the
left
and
right
speakers.
Note
that
some
THX
Certified
center
channel
speakers
must
he
placed
verti-
cally,
while
others
may
be
placed
hori-
zontally.
Consult
the
instruction
manual
accompanying
your
center
speaker
for
the
correct
mounting
position.
Surround
speakers
should
be
placed
on
the
side
walls
of
the
room,
at
or
slightly
behind
the
listening
position.
The
center
of
the
speaker
should
face
into
the
room
with
the
active
speaker
drivers
pointing
towards
the
front
and
rear
of
the
room.
The
speakers
should
be
located
so
that
the
bottom
of
the
cabinet
is
at
least
two
feet
higher
than
the
listeners'
ears
when
in
the
desired
area.
If
side
wall
mounting
is
not
practical,
the
speakers
may
be
placed
on
a
rear
wall,
behind
the
listening
position.
Again,
they
should
be
located
so
that
the
bottom
of
the
cabinet
is
at
least
two
feet
higher
than
the
listeners'
ears.
The
speakers
should
be
no
more
than
six
feet
behind
the
rear
of
the
seating
area.
Subwoofers
produce
non
-directional
sound,
so
they
may
be
placed
almost
anywhere
in
a
room.
Subwoofer
place-
ment
is
highly
influenced
by
room
size
and
shape,
and
the
type
of
subwoofer
used.
Follow
the
instructions
of
the
sub
-
woofer's
manufacturer,
or
experiment
with
the
best
location
for
a
subwoofer
in
your
listening
room.
Once
the
speakers
have
been
placed
in
the
room
and
connected,
the
final
step
is
to
enter
the
configuration
information
and
balance
the
speaker
output
levels.
Before
proceeding
further
this
is
a
good
time
to
review
the
installation
section
of
the
manual
to
make
certain
that
all
connec-
tions
are
properly
male.
System
Settings
1.
Plug
the
unit
into
an
AC
wall
outlet
and
press
the
Power
button
on
either
the
front
panel
m
or
the
remote
0.
Note
that
the
ring
surrounding
the
front
panel
switch
will
turn
green,
and
the
front
panel
display
will
illuminate.
2.
Run
on
the
TV
connected
to
the
receiver.
Select
the
appropriate
video
input
on
the
TV.
NOTE:
Although
the
unit
will
switch
"S"
video
signals,
the
on
screen
menus
con-
trol
system
is
NOT
visible
on
the
S
video
output.
3.
Press
the
SCREEN
DISPLAY
(E)
button,
and
then
press
any
of
the
naviga-
tional
arrow
buttons
or
the
SELECT
iD
button
on
the
remote
to
bring
the
MAIN
MENU
up
on
your
video
screen.
(Figure
#1)
4.
Press
the
y
button
five
times
until
the
on
screen
>
cursor
is
pointing
to
SET
UP
MENU.
5.
Press
SELECT
E
to
move
to
the
next
screen,
SET
UP
MENU
1.
(Figure
#2).