Harman Kardon AVR80MKII Owners Manual - Page 31
SELECTION:After
![]() |
View all Harman Kardon AVR80MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
On Screen Display 29 The following functions of the AVR800 may be controlled through the Menu Control System: INPUT SELECTION:After reaching the INPUT SELECTOR menu (Figure #13), use the arrow keys on the remote 41) to select the desired input. Remember that when a split listening session is desired, select the VIDEO source first, followed by the AUDIO source. To use the Tape Monitor, press the down arrow button ye to move the on-screen cursor. Use the 4 and arrow buttons to turn the Tape Monitor On or Off. TEST TONE: At this menu you may adjust the speaker output levels. For information on this procedure, refer to the System Configuration section of this Manual. MULTI -ROOM SEL: For infomiation on configuring and using the multiroom audio functions of the AVR80//, consult the appropriate section of this Manual. SET UP MENU: For information on using the Set Up menus, refer to the System Configuration section of this Manual. REC OUT SELECTOR >TAPE ■SOURCE■ VCR1 ■SOURCE■ AUDIO ■TUNER■ VIDEO ■LD■ RETURN TO MAIN MENU 1 Figure 15 SURROUND MODE >MODE :THX CINEMA DELAY TIME :20ms RECORD OUT SELECTION:After reaching the REC OUT SELECTOR menu (Figure #14) use the navigational arrow keys to select the input to either TAPE 1 or VCR 1. Note that if the current main input SOURCE is chosen, two more lines will appear on the screen to remind you which audio and video sources are selected. (Figure #15). RETURN TO MAIN MENU Figure 16 SURROUND MODE: After reaching the SURROUND MODE menu (Figure #16), use the navigational arrows e to select the desired mode. When a mode is selected that uses the surround channels, you may change the rear channel DELAY TIME at this menu.
![](/manual_guide/products/harman-kardon-avr80mkii-owners-manual-5c9f71b/31.png)