HealthRider E660 Instruction Manual - Page 5
Assembly, Warning
View all HealthRider E660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that a proper diet and adequate rest are essential for successful results. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. EXERCISE INTENSITY Whether your goal is to burn fat or strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. For effective exercise, your heart rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise. This is known as your training zone. You can find your training zone in the table below. Training zones are listed according to age and physical condition. AGE 20 25 30 35 40 45 50 55 60 65 70 75 80 UNCONDITIONED TRAINING ZONE (BEATS/MIN) 138-167 136-166 135-164 134-162 132-161 131-159 129-156 127-155 126-153 125-151 123-150 122-147 120-146 CONDITIONED TRAINING ZONE (BEATS/MIN) 133-162 132-160 130-158 129-156 127-155 125-153 124-150 122-149 121-147 119-145 118-144 117-142 115-140 Burning Fat To burn fat, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the low end of your training zone as you exercise. Aerobic Exercise If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the middle of your training zone. WORKOUT GUIDELINES Each workout should include three parts: (1) a warmup, (2) training zone exercise, and (3) a cool-down. Warming up Warming up prepares the body for exercise by increasing circulation, delivering more oxygen to the muscles, and raising the body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. Training Zone Exercise After warming up, increase the intensity of your exercise until your heart rate is in your training zone for 20 to 30 minutes. Cooling Down Finish each workout with 5 to 10 minutes of stretching. Stretching after exercise develops flexibility and helps prevent post-exercise problems. A proper cool-down should leave you feeling relaxed and comfortably tired. EXERCISE FREQUENCY To maintain or improve your condition, plan three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. 16 ASSEMBLY Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools are required for assembly: the included allen wrenches and your own phillips screwdriver adjustable spanner and rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split Washer (85)-4 M10 Split Washer (73)-4 M8 Washer (89)-4 Curved Washer (74)-4 M10 Flat Washer (94)-5 M4 x 16mm Screw (60)-5 M4 x 16mm Flange Screw (88)-6 M8 x 19mm Button Screw (76)-4 Console Plate Screw (39)-4 M10 Nylon Locknut (55)-6 Patch Bolt (90)-1 Handlebar Bolt (92)-4 Carriage Bolt (2)-2 5