HealthRider Rc270 Bike English Manual - Page 19

Maintenance And Trouble-shooting

Page 19 highlights

MAINTENANCE AND TROUBLE-SHOOTING The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight. Inspect and properly tighten all parts of the exercise cycle regularly. Make sure to keep the indicated screws tight (there are two screws on each side). In addition, make sure to keep the pedals tightened. Keep these screws tight HOW TO LEVEL THE EXERCISE CYCLE If the exercise cycle rocks slightly during use, turn one or both of the leveling pads under the rear stabilizer until the the rocking motion is eliminated. Leveling Pads BATTERY REPLACEMENT If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 4 on page 6. PULSE SENSOR TROUBLE-SHOOTING • Avoid moving your hands while using the pulse sensor. Excessive movement may interfere with heart rate readings. • Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. • For the most accurate heart rate reading, hold the metal contacts for about 15 seconds. • For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft cloth-never use alcohol, abrasives, or chemicals. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

19
MAINTENANCE AND TROUBLE-SHOOTING
The exercise cycle can be cleaned with a soft, damp
cloth. To prevent damage to the console, keep liquids
away from the console and keep the console out of
direct sunlight.
Inspect and prop-
erly tighten all
parts of the exer-
cise cycle regular-
ly. Make sure to
keep the indicated
screws tight (there
are two screws on
each side). In
addition, make
sure to keep the
pedals tightened.
HOW TO LEVEL THE EXERCISE CYCLE
If the exercise
cycle rocks slightly
during use, turn
one or both of the
leveling pads
under the rear sta-
bilizer until the the
rocking motion is
eliminated.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 4 on page 6.
PULSE SENSOR TROUBLE-SHOOTING
Avoid moving your hands while using the pulse sen-
sor. Excessive movement may interfere with heart
rate readings.
Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft cloth—never use alcohol,
abrasives, or chemicals.
Leveling
Pads
Keep these
screws tight