HealthRider Rc270 Bike English Manual - Page 7

5. Connect the Upper Wire Harness (16) to the wire harness on the Console (9). Insert both wire har- 5 nesses into the Upright (6). Attach the Console (9) to the Upright (6) with two M10 x 25mm Button Screws (55), an M10 x 30mm Button Screw (39), and three M10 Split Washers (69) as shown. 6. Attach the Seat (12) to the Seat Carriage (11) with 6 four M6 x 16mm Hex Screws (29) and four M8 Flat Washers (18). 9 55 69 6 Wire Harness 16 39 69 55 12 11 7. Attach a Seat Handle (14) to the Seat Carriage (11) with two M8 x 19mm Button Bolts (43) and two M8 Nylon Locknuts (56). Attach the other Seat Handle (14) to the Seat Carriage (11) in the same way. 7 11 56 8. Attach the Backrest (13) to the Seat Carriage (11) with four M6 x 38mm Hex Screws (78) and four M6 8 Washers (25). 18 18 29 14 43 11 14 13 25 78 25 78 7