HealthRider Stride Trainer 900 Elliptical English Manual - Page 11
Attach the Pedal 49 to the Right Pedal Arm
View all HealthRider Stride Trainer 900 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
12. Apply a small amount of grease to the right Crank Arm (20). Orient a Roller Arm (45) so that the Roller (51) is in the position shown. Slide the Roller Arm (45) onto the right Crank Arm (20) while setting the Roller (51) on the Ramp (3). Attach the Roller Arm (45) with an M8 x 19mm Patch Screw (82), an Axle Cover (53), and an M8 x 25mm Washer (98); to avoid breaking the Axle Cover, do not overtighten the Patch Screw. Repeat this step on the other side of the elliptical. 12 51 3 13. Identify the Right Pedal Arm (58), which is marked with a "Right" sticker, and orient it as 13 shown. 49 Then, orient a Pedal (49) as shown. Attach the Pedal (49) to the Right Pedal Arm (58) with six #10 x 12.7mm Screws (59) and six M6 Split Washers (111). Attach the other Pedal (not shown) to the Left Pedal Arm (not shown) in the same way. 20 Grease 98 53 82 45 58 111 111 59 59 59 11