HealthRider Stride Trainer 900 Elliptical English Manual - Page 9

7. Have a second person hold the Right Upper Body Leg (60) near the right side of the Upright (4). Locate the wire tie in the right side of the Upright (4). Tie the wire tie to the Right Control Wire (41) in the Right Upper Body Leg (60). Tip: Do not pinch the Right Control Wire (41). Pull the upper end of the wire tie until the Right Control Wire is routed through the Upright (4). At the same time, slide the Right Upper Body Leg (60) onto the Pivot Axle (35); make sure that the right Upper Body Leg is in front of the right Crank Arm (20). Tip: To prevent the Right Control Wire (41) from falling into the Upright (4), secure the Right Control Wire with the wire tie. Attach the Right Upper Body Leg (60) with an M8 x 19mm Patch Screw (82) and an M8 x 25mm Washer (98). Repeat this step on the other side of the elliptical. 7 Wire Tie Avoid pinching the wires Wire Tie 35 41 4 60 98 82 20 8. Attach an Outer Cover (67) to the Inner Cover (68) on the Right Upper Body Leg (60) with two 8 M4 x 16mm Screws (104). Repeat this step on the other side of the elliptical. 104 104 68 67 60 9