HP 1018 Service Manual - Page 13
Model and serial numbers, Hardware description, - laserjet manual
UPC - 882780435094
View all HP 1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Model and serial numbers The model number and serial number are listed on an identification label located on the back of the product. The serial number contains information about the country/region of origin, and the revision level, production code, and production number of the product. The label also contains power-rating and regulatory information. Figure 1-3 Model- and serial-number label (HP LJ 1010 printer is shown) Hardware description The HP LaserJet 1018 printer offers HP REt technology for 600 x 600 x 2 dpi printing (effectively 1200 dpi). The printer prints up to 12 ppm. With an effective 1200 dpi printing resolution, the printer has exceptional text and graphics print quality. The simple control panel and improved paper-handling make this printer easy to use. The main input tray has a 150-sheet (75-g/m2 [20-lb] media) capacity for continuous, multiple-page printing. The priority feed slot is used to manually feed single sheets of most recommended media and holds up to ten sheets of 75-g/m2 (20-lb) media. Both the main input tray and the priority feed slot are center-justified for all supported media sizes. The output bin holds up to 125 sheets of 75-g/ m2 (20-lb) media. This printer has a very fast first-page-out, at less than 10 seconds to first page out. The base memory is 2 MB, and the printer uses an embedded 133 MHz processor. The print engine has an average duty cycle of 1,000 pages per month (7,000 peak) or 50,000 total pages printed. The standard replacement print-cartridge life is 2,000 pages, in accordance with ISO/ IEC 19752. NOTE Actual print cartridge life depends on specific usage. Firmware description The firmware in the printer includes these features: ● Host-based printing ● EconoMode functionality ENWW Overview of product 5