HP 1018 Service Manual - Page 78
CAUTION, Make sure that the two plastic antistatic tabs are correctly positioned.
UPC - 882780435094
View all HP 1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
2. Position the top-cover assembly over the pressure-release levers (callout 1), and lower it onto the chassis. Make sure that the pressure-release levers are inserted through the slots (callout 2) on the top-cover assembly. 1 2 Figure 5-16 Reinstall the top-cover assembly (2 of 2) CAUTION Make sure that the two plastic antistatic tabs are correctly positioned. The tabs must protrude into the output bin area. 70 Chapter 5 Removal and replacement ENWW
2.
Position the top-cover assembly over the pressure-release levers (callout 1), and lower it onto
the chassis. Make sure that the pressure-release levers are inserted through the slots (callout 2)
on the top-cover assembly.
1
2
Figure 5-16
Reinstall the top-cover assembly (2 of 2)
CAUTION
Make sure that the two plastic antistatic tabs are correctly positioned. The
tabs must protrude into the output bin area.
70
Chapter 5
Removal and replacement
ENWW