HP 17-ac100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 49
Bottom cover, Remove the optical drive see
View all HP 17-ac100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Bottom cover Description Bottom cover Spare part number 856601-001 Before removing the bottom cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). To remove the bottom cover: 1. Position the computer upside down with the front toward you. 2. Remove the two rubber feet (1). 3. Remove the service label screw cutouts from above the two screws under the label (2). NOTE: Two screws that are located under the regulatory label are marked with a dashed circle and "+" sign . Do not remove the regulatory label - only remove or punch holes through the circular cutouts above the screws. Component replacement procedures 41