HP 17-ac100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 80
Lift to disengage the adhesive that secures the webcam/microphone module to the display
View all HP 17-ac100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
2. Remove the display bezel (4). NOTE: In this procedure the display will not be connected to the computer as shown in the following image. 3. To remove the webcam/microphone module: a. Position the display assembly with the top edge toward you. b. Lift to disengage the adhesive that secures the webcam/microphone module to the display (1). c. Disconnect the cable (2) from the module. d. Remove the module (3). 72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2.
Remove the display bezel
(4)
.
NOTE:
In this procedure the display will not be connected to the computer as shown in the following
image.
3.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Lift to disengage the adhesive that secures the webcam/microphone module to the display
(1)
.
c.
Disconnect the cable
(2)
from the module.
d.
Remove the module
(3)
.
72
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts