HP 17-ac100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 51
Hard drive, To remove the hard drive
View all HP 17-ac100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive cover. Description 2-TB, 5400-rpm, 2.5-inch 1-TB, 5400-rpm, 2.5-inch, hybrid 8 GB SSD 1-TB, 5400-rpm, 2.5-in 500-GB, 5400-rpm, 2.5 inch Hard drive holder Spare part number 801808-005 731999-005 778192-005 778188-005 905974-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the hard drive: 1. Remove the USB board cable from atop the hard drive as follows: a. Lift the ZIF connector (1), and then disconnect the cable from the system board (2). b. Lift the ZIF connector (3), and then disconnect the cable from the USB board (4). c. Remove the USB board cable from atop the hard drive (5). Component replacement procedures 43