HP 17-ac100 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 60

Solid-state drive holder and board, Remove the Phillips PM2.0×4.5 screws

Get HP 17-ac100 PDF manuals and user guides View all HP 17-ac100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Solid-state drive holder and board Description Solid-state drive holder Solid-state drive board Spare part number 858260-001 856614-001 Before removing the solid-state drive holder and board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 41). 7. Remove the solid-state drive (see Solid-state drive on page 51). To remove the solid-state drive holder and board: 1. Remove the Phillips PM2.0×4.5 screws (1) that secures the solid-state drive holder to the computer. 2. Pull the board away from the connector on system board (2), and then remove the solid-state drive holder and board assembly (3). 3. To remove the solid-state drive board from the holder, remove the two Phillips PM2.0×4.0 screws (1) that secure the board to the holder. 52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Solid-state drive holder and board
Description
Spare part number
Solid-state drive holder
858260-001
Solid-state drive board
856614-001
Before removing the solid-state drive holder and board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
34
).
5.
Remove the optical drive (see
Optical drive
on page
35
).
6.
Remove the bottom cover (see
Bottom cover
on page
41
).
7.
Remove the solid-state drive (see
Solid-state drive
on page
51
).
To remove the solid-state drive holder and board:
1.
Remove the Phillips PM2.0×4.5 screws
(1)
that secures the solid-state drive holder to the computer.
2.
Pull the board away from the connector on system board
(2)
, and then remove the solid-state drive
holder and board assembly
(3)
.
3.
To remove the solid-state drive board from the holder, remove the two Phillips PM2.0×4.0 screws
(1)
that secure the board to the holder.
52
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts