HP 2000-bf00 HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance - Page 40

Hard drive, available in the Hard Drive Hardware Kit.

Get HP 2000-bf00 PDF manuals and user guides View all HP 2000-bf00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit. Description Supports the following 9.5 mm / 7.0 mm, 6.35 cm (2.5 in) SATA hard drives: 320 GB, 7200 rpm Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws) Spare part number 634862-001 640878-001 Before removing the hard drive, remove the following components: 1. Battery (see Battery on page 30) 2. Service door (see Service door on page 31) Remove the hard drive: 1. Use the rubber tab on the hard drive bracket (1) to move the hard drive to the left and disconnect it from the hard drive adapter. 2. Lift the hard drive (2) out of the hard drive bay. 3. To replace the hard drive bracket, remove the four Phillips 3.0×3.0 screws (1) that secure the hard drive bracket to the hard drive. 32 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket and hard drive connector. The
hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also
available in the Hard Drive Hardware Kit.
Description
Spare part number
Supports the following
9.5 mm / 7.0 mm
,
6.35 cm
(2.5 in) SATA hard drives:
320 GB, 7200 rpm
634862-001
Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws)
640878-001
Before removing the hard drive, remove the following components:
1.
Battery (see
Battery
on page
30
)
2.
Service door (see
Service door
on page
31
)
Remove the hard drive:
1.
Use the rubber tab on the hard drive bracket
(1)
to move the hard drive to the left and disconnect
it from the hard drive adapter.
2.
Lift the hard drive
(2)
out of the hard drive bay.
3.
To replace the hard drive bracket, remove the four Phillips 3.0×3.0 screws
(1)
that secure the
hard drive bracket to the hard drive.
32
Chapter 4
Removal and replacement procedures