HP 2000-bf00 HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance - Page 47

Keyboard, Open the computer as far as possible.

Get HP 2000-bf00 PDF manuals and user guides View all HP 2000-bf00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Keyboard Description For use in the United States, Black For use in French Canada, Black Spare part number 698694-001 698694-DB1 Before removing the keyboard, remove the following components: 1. Battery (see Battery on page 30) 2. Service door (see Service door on page 31) Remove the keyboard: 1. Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to the computer. 2. Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay to release the top edge keyboard tabs. 3. Turn the computer right-side up, with the front toward you. 4. Open the computer as far as possible. 5. Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest. 6. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then disconnect the keyboard cable (2) from the system board. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Keyboard
Description
Spare part number
For use in the United States, Black
698694-001
For use in French Canada, Black
698694-DB1
Before removing the keyboard, remove the following components:
1.
Battery (see
Battery
on page
30
)
2.
Service door (see
Service door
on page
31
)
Remove the keyboard:
1.
Remove the Phillips 4.0 x 2.5 screw
(1)
in the WLAN module bay that secures the keyboard to
the computer.
2.
Using a thin, flat-bladed screwdriver, gently pry loose the three snaps
(2)
inside the battery bay to
release the top edge keyboard tabs.
3.
Turn the computer right-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest.
6.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
then disconnect the keyboard cable
(2)
from the system board.
Component replacement procedures
39