HP 2600 HP Business Inkjet 2600/2600dn - (English) User's Guide - Page 66
Tips for loading paper , Media size, Left and right Top, Bottom
View all HP 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Tips for loading paper ! The default tray size is 215.9 by 355.6 mm (8.5 by 14 inches). Extend the paper trays to print on larger media, including 11 x 17, Super B (13 x 19 inches), A3, and B5 media sizes. ! Insert media vertically (portrait orientation). If you want to print horizontally (landscape orientation), make the selection through your software. ! When using the front manual feed, always load paper print-side down with the right edge of the paper aligned against the right edge of the tray. When using the rear manual feed, load paper print-side up with the left edge of the paper against the left edge of the manual feed. ! To prevent jams, load only one type of media at a time into a paper tray. Also, when adding media, always remove the existing media and realign it with the new media before loading. For more information about avoiding media jams, see "Tips for avoiding jams." ! Always use media that conforms to the printer specifications. For more information about types of media that can be used with the printer, see "Media and paper-handling specifications." ! Do not use paper that is heavily textured or does not accept ink well, which can cause poorly filled graphics or text. ! The document margins must match (or exceed) these minimum margin settings in portrait orientation: Media size Left and right Top U.S. Letter, U.S. Legal, 6 mm (0.25 in) 3 mm (0.12 in) U.S. Executive media 11 x 17, statement, A3, 5 mm (0.2 in) Super B (13 x 19 inches), JIS B4, custom sizes 3 mm (0.12 in) A4 4 mm (0.134 in) 3 mm (0.12 in) A5, JIS B5, cards, envelopes 3.3 mm (0.13 in) 3 mm (0.12 in) Bottom 13 mm (0.5 in) 13 mm (0.5 in) 13 mm (0.5 in) 13 mm (0.5 in) 7-6 ENWW