HP 2730p HP EliteBook 2730p Notebook PC - Maintenance and Service Guide - Page 58
up and forward until it rests upside down on the palm rest., Swing the top edge of the keyboard
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removal and replacement procedures 2. Turn the computer display-side up, with the front toward you. 3. Open the computer as far as possible. 4. Lift the rear edge of the keyboard 1 and slide it 2 back until the pointing stick cable is accessible. 5. Release the zero insertion force (ZIF) connector 3 to which the pointing stick cable is attached, and disconnect the pointing stick cable 4 from the system board. 6. Swing the top edge of the keyboard 1 up and forward until it rests upside down on the palm rest. 7. Release the ZIF connector 2 to which the keyboard cable is attached, and disconnect the keyboard cable 3 from the system board. 8. Remove the keyboard. Reverse this procedure to install the keyboard. Maintenance and Service Guide 4-19