HP 2730p HP EliteBook 2730p Notebook PC - Maintenance and Service Guide - Page 67
that secure the display panel cable to the system board., Remove the two Phillips PM2.0×4.0 screws
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures Remove the display assembly: 1. Open the computer as far as possible. 2. Disconnect the following cables from the system board and remove the cables from the clips built into the system board shielding: 1 Fingerprint reader board cable 2 Webcam cable 3 Microphone cable 3. Remove the wireless antenna cables 4 from the opening in the system board and the clips built into the system board shielding. 4. Remove the two Phillips PM2.0×4.0 screws 1 that secure the display panel cable to the system board. 5. Disconnect the display panel cable 2 from the system board. 6. Remove the Phillips PM2.0×4.0 screw 3 that secures the display converter cable to the system board. 7. Disconnect the display converter cable 4 from the system board. 4-28 Maintenance and Service Guide