HP 2x1Ex16 HP IP Console Viewer User Guide - Page 31

o If no new console switches are found or if you pressed Stop during the add process, the Discover Wizard was unsuccessful window appears. Click Finish to exit. You must manually add the console switch. For more information, see "Adding a console switch without an assigned IP address (on page 21)." 5. Select one or more console switches to add from the Console Switches Found box, and then click the > button to move the selection to the Console Switches to add box. Repeat these steps for all the console switches that you want to add. 6. Click Next. The Adding Console Switches window appears. A progress bar appears while new console switches are added to the list. When all of the selected consoles have been added to the local database, the Completing the Discover Wizard window appears. Click Finish to exit and return to the main window. The new console switches appear in the list view. If any console switches were not added to the local database for any reason, including if you pressed Stop during the add process, the Discover Wizard Not All Console Switches Added page appears. This page lists all of the console switches that you selected and the status for each. The status is indicated if a console switch was added to the local database and if not, why the process failed. Click Done when you are finished reviewing the list. NOTE: If a console switch already exists in the local database with the same IP address as a discovered console switch, then the discovered console switch is ignored and is not displayed on the next Discover Wizard window. Managing multiple connections A server that has connections to more than one console switch managed by the HP IP Console Viewer usually appears as two different servers in the main window when the console switches are initially Adding and discovering console switches 31