HP 4300tn HP Jetdirect Print Servers - Administrator Guide - Page 234
Table 9.12, Error Messages 3 of 11, HP Jetdirect Configuration
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Table 9.12 Error Messages (3 of 11) Error Code and Message Description 10 LAN ERROR UNDERFLOW (Wired Ethernet) There may be a problem with your network cabling or the HP Jetdirect print server. Check the cabling and connectors on your network. If you cannot find a problem with your network cabling, run the power-on self-test: turn the printer off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. 10 LAN ERROR-AUTO (Token Ring) The HP Jetdirect print server detected an REMOVAL internal hardware error following the Token Ring beacon auto-removal process and has removed itself from the ring. 11 LAN ERROR RETRY FAULTS (Wired Ethernet) There is a problem with your network cabling or external network configuration. Verify operation of the hub or switch port. 11 LAN ERROR REMOVE RECEIVE (Token Ring) The HP Jetdirect print server has received a Remove Adapter data frame during the Token Ring insertion process, or has received a remove ring station data frame request, and has removed itself from the ring. 12 LAN ERROR NO LINKBEAT With a 10/100 Base-TX port connected, this message is displayed if Link Beat is not sensed. Check the network cable, and verify that the concentrator/hub is providing Link Beat. 13 NETWORK RECONFIG - MUST REBOOT Reset or power off/on the HP Jetdirect print server to enable new configuration values. 14 DISCONNECTED The Novell NetWare protocol is disconnected. Check the server and the print server. 15 CONFIGURATION ERROR (Ethernet) The configuration information for the NetWare functions is not stored correctly on the HP Jetdirect print server. Use the installation software, embedded Web server, or other tools to reconfigure the print server. If this error persists, there may be a problem with the HP Jetdirect print server. 16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been configured for NetWare. Use the installation software, embedded Web server, or other tools to configure the print server for NetWare networks. ENWW HP Jetdirect Configuration Page 234