HP 4300tn HP Jetdirect Print Servers - Administrator Guide - Page 285
Table C.2, HP Jetdirect Graphical Control Panel Menu 3 of 7, The HP Jetdirect Control Panel Menu 285
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Table C.2 HP Jetdirect Graphical Control Panel Menu (3 of 7) Menu Item Options SECURITY CONFIGURE PSK Description of settings This menu is displayed only if EAP Authentication has been selected. Set the following parameters: USER NAME: Enter a User Name for the device. Up to 64 characters of text may be entered. PASSWORD: Enter a Password for the device. Up to 64 characters of text may be entered. DYNAMIC KEYS: This item appears if you selected an authentication method for a wireless print server that supports dynamic encryption. Select an available option: BASIC: Dynamic WEP encryption is supported. ROBUST: Dynamic Wi-Fi Protected Access (WPA) and WEP encryption protocols are supported. When configured for EAP/PSK authentication, the print server uses Robust encryption (WPA encryption protocols). When configured for EAP/802.1x authentication (LEAP, PEAP, TLS, TTLS only), the print server may be configured with either Basic encryption or Robust encryption depending on your network. Dynamic encryption protocols are under the control of the authentication server and also must be supported by the Access Point. PASS-PHRASE: Enter a network pass-phrase that will be used to generate the Pre-Shared Key for EAP authentication on your network. A pass-phrase must be from 8 to 63 ASCII characters in the hexadecimal range 21 through 7E (characters 0-9, a-z, A-Z and numerous special characters including ENWW The HP Jetdirect Control Panel Menu 285