HP 4300tn HP Jetdirect Print Servers - Administrator Guide - Page 77
on Windows NT/2000/XP, CAUTION
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
To use the route command, you will also need the IP address of your workstation. To view it, you can enter the appropriate command at the command prompt: C:\> ipconfig (on Windows NT/2000/XP) C:\> winipconfig (on Windows 98) To create a route from the system command prompt, enter the following command: route add where is the IP address configured on the HP Jetdirect print server, and is the IP address of the workstation's network card that is attached to the same physical LAN as the print server. For example, to create a route from your workstation with IP address 169.254.2.1 to a print server with a default IP address of 192.0.0.192, try this command: route add 192.0.0.192 169.254.2.1 CAUTION Using Telnet to manually set an IP address will override dynamic IP configuration (such as BOOTP, DHCP, or RARP), resulting in a static configuration. In a static configuration, the IP values are fixed and the operation of BOOTP, DHCP, RARP and other dynamic configuration methods may no longer function. Whenever you are manually changing an IP address, you should also reconfigure the subnet mask and default gateway at the same time. ENWW TCP/IP Configuration 77