HP 5100 HP LaserJet 5100 Series - Start Guide - Page 19
Step 8. Load Tray 1 (optional), under the tabs on the guides.
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Step 8. Load Tray 1 (optional) Tray 1 is a multi-purpose tray and holds up to 100 sheets of paper, approximately 10 envelopes, or 20 index cards. Note Paper loaded in Tray 1 will be printed first unless the Tray 1 setting is changed from the printer control panel. To change the order in which trays are used, see the online use guide. 1 Open Tray 1 by pulling down on the top center of the door. Pull out the tray extension until it clicks into place. 2 Flip open the second tray extension if the paper is longer than 9 inches (229 mm). 3 Adjust the guides to the desired paper size. 4 Load paper. The paper should fit under the tabs on the guides. • Load letter or A4 paper with the long edge toward the printer. • Load legal, 11 x 17, or A3 paper with the short edge toward the printer. Note See the sections on letterhead, envelopes, and duplexing in the online use guide for proper orientation of specific jobs. ENWW start guide 17