HP 5100 HP LaserJet 5100 Series - Start Guide - Page 25
Connecting to fast Ethernet (10/100Base-TX) network, For a successful link - 5100tn laserjet printer
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English Caution Connecting to fast Ethernet (10/100Base-TX) network Use the RJ-45 port to connect the printer to fast Ethernet (10/ 100Base-TX) network. (This port is only available on the HP LaserJet 5100tn and 5100dtn printers.) Make sure the printer is turned off before connecting to the RJ-45 port. Note Figure 8 Connecting to Ethernet 10Base-T network • Connect a twisted-pair network cable to the RJ-45 port on the HP Jetdirect print server card. • Connect the other end of the cable to the network. For a successful link, either the 10 or 100 LED at the port should turn on when the printer is turned on. If no LEDs turn on, the print server is unable to link to the network. For more information, see the problem-solving chapter in the online use guide. ENWW start guide 23