HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 269

View OSPFv3 view Default level 2: System level Parameters maximum: Maximum number of ECMP routes , in the range of 1 to 8. Description Use maximum load-balancing to configure the maximum number of ECMP routes. Use undo maximum load-balancing to restore the default. By default, the maximum number of ECMP routes is 8. Examples # Configure the maximum number of ECMP routes as 6. system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] maximum load-balancing 6 ospfv3 Syntax ospfv3 [ process-id ] View undo ospfv3 [ process-id ] System view Default level 2: System level Parameters process-id: OSPFv3 process ID, ranging from 1 to 65535. The process ID defaults to 1. Description Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view. Use undo ospfv3 to disable an OSPFv3 process. The system runs no OSPFv3 process by default. An OSPFv3 process can run properly only when router ID is configured in OSPFv3 view. Otherwise, you can find the process, but which cannot generate any LSA. Related commands: router-id. Examples # Enable the OSPFv3 process with process ID as 120 and configure the Router ID as 1.1.1.1. system-view [Sysname] ospfv3 120 [Sysname-ospfv3-120] router-id 1.1.1.1 258