HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 68
version
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Examples # Disable the source IP address validation on incoming RIP routing updates. system-view [Sysname-rip] rip 100 [Sysname-rip-100] undo validate-source-address version Syntax version { 1 | 2 } View undo version RIP view Default level 2: System level Parameters 1: Specifies the RIP version as RIPv1. 2: Specifies the RIP version as RIPv2. RIPv2 messages are multicast. Description Use version to specify a global RIP version. Use undo version to remove the configured global RIP version. By default, if an interface has a RIP version specified, the RIP version takes effect; if it has no RIP version specified, it can send RIPv1 broadcasts, and receive RIPv1 broadcasts and unicasts, and RIPv2 broadcasts, multicasts, and unicasts. If an interface has an RIP version specified, the RIP version takes precedence over the global RIP version. If no RIP version is specified for the interface and the global version is RIPv1, the interface inherits RIPv1, and it can send RIPv1 broadcasts, and receive RIPv1 broadcasts and unicasts. If no RIP version is specified for the interface and the global version is RIPv2, the interface operates in the RIPv2 multicast mode, and it can send RIPv2 multicasts, and receive RIPv2 broadcasts, multicasts, and unicasts. Examples # Specify RIPv2 as the global RIP version. system-view [Sysname] rip 100 [Sysname-rip-100] version 2 57