HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 347

no-advertise: Sets the NO_ADVERTISE community attribute for BGP routes. Routes with this attribute cannot be advertised to any peers. no-export: Sets the NO_EXPORT community attribute for BGP routes. Routes with this attribute cannot be advertised out of the autonomous system or confederation, but can be advertised to other sub ASs in the confederation. no-export-subconfed: Sets the NO_EXPORT_SUBCONFED community attribute for BGP routes. Routes with this attribute cannot be advertised out of the sub autonomous system. additive: Adds the specified COMMUNITY attribute to the original COMMUNITY attribute of BGP routes. Description Use apply community to set the specified COMMUNITY attribute for BGP routes. Use undo apply community to remove the apply clause. No COMMUNITY attribute is set for BGP routes by default. Related commands: ip community-list and if-match community. Examples # Configure node 16 in permit mode of routing policy setcommunity: Set the NO_EXPORT community attribute for BGP routes matching AS path list 8. system-view [Sysname] route-policy setcommunity permit node 16 [Sysname-route-policy] if-match as-path 8 [Sysname-route-policy] apply community no-export apply cost Syntax apply cost [ + | - ] value View undo apply cost Routing policy view Default level 2: System level Parameters +: Increases a cost value. -: Decreases a cost value. value: Cost in the range of 0 to 4294967295. Description Use apply cost to set a cost for routing information. Use undo apply cost to remove the clause configuration. No cost is set for routing information by default. 336