HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 44
display rip interface
![]() |
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Field Rip-interface imported Description Routes learned from a RIP-enabled interface. Routes redistributed from other routing protocols. display rip interface Syntax View display rip process-id interface [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: RIP process ID, in the range of 1 to 65535. interface-type interface-number: Specifies an interface by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display rip interface to display the RIP interface information of the RIP process. If no interface is specified, information about all RIP interfaces of the RIP process is displayed. Examples # Display all the interface information of RIP process 1. display rip 1 interface Interface-name: Vlan-interface11 Address/Mask:1.1.1.1/24 Version:RIPv1 MetricIn:5 MetricIn route policy:123 MetricOut:5 MetricOut route policy:234 Split-horizon/Poison-reverse:on/off Input/Output:on/on Default route:off Current packets number/Maximum packets number:234/2000 Table 9 Command output Field Interface-name Description The name of an interface running RIP. 33
![](/manual_guide/products/hewlettpackard-6125g-hp-6125g-amp-6125gxg-blade-switches-layer-3-ip-routing-command-referencer2103-72a133c/44.png)