HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 63

[Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip poison-reverse rip split-horizon Syntax rip split-horizon View undo rip split-horizon Interface view Default level 2: System level Parameters None Description Use rip split-horizon to enable the split horizon function. Use undo rip split-horizon to disable the split horizon function. The split horizon function is enabled by default. The split horizon function is necessary for preventing routing loops. To disable it in special cases, make sure it is necessary. Only the poison reverse function takes effect if both the split horizon and poison reverse functions are enabled. Examples # Enable the split horizon function on VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip split-horizon rip summary-address Syntax rip summary-address ip-address { mask | mask-length } View undo rip summary-address ip-address { mask | mask-length } Interface view Default level 2: System level Parameters ip-address: Destination IP address of summary route. mask: Subnet mask of summary route, in dotted decimal format. 52