HP 6127 HP Deskjet 6120 series printers - (English) Reference Guide - Page 19
what is the problem? - power
View all HP 6127 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
english FDR_RG.book Page 17 Wednesday, July 31, 2002 9:38 AM installation troubleshooting: Windows USB, continued what is the problem? When I connect a USB cable between the printer and my computer, an "Unknown Device" message appears. If you are using Windows 2000, the "Unknown Device" message does not mean that there is a problem. However, if you are using Windows 98, Me, or XP, the "Unknown Device" message does mean that there is a problem. Use the troubleshooting steps below to solve the problem. possible causes... to solve the problem... • Static electricity has built up in the cable between the printer and your computer. • You may have a defective USB cable. 1. Disconnect the USB cable from the printer. 2. Unplug the printer from its power cord. 3. Wait approximately 30 seconds. 4. Plug the power cord into the printer. 5. Plug the USB cable into the printer. 6. Replace the USB cable or use a parallel cable if "Unknown Device" continues to appear in the New Hardware Found dialog box and you are not using Windows 2000. 17