HP 8000 Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minitower - Page 28
Removing a PCI Express x16 Expansion Card, Removing a Standard PCI Expansion Card
UPC - 884420665106
View all HP 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
b. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Lift the card straight up to remove it. Be sure not to scrape the card against other components. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. Figure 2-12 Removing a Standard PCI Expansion Card c. If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. Lift the card straight up to remove it. Be sure not to scrape the card against other components. Figure 2-13 Removing a PCI Express x16 Expansion Card 22 Chapter 2 Hardware Upgrades ENWW