HP 8150 HP Embedded Web Server for HP LaserJet Printers - User Guide - Page 11

Accessing the HP Embedded Web Server, System Requirements - network printer address

Get HP 8150 - LaserJet B/W Laser Printer PDF manuals and user guides
UPC - 725184622984
View all HP 8150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Accessing the HP Embedded Web Server System Requirements To use the HP Embedded Web Server, you must have the following: • a TCP/IP-based network • a web browser installed on your computer, preferably either Netscape Navigator 4.7X or Microsoft Internet Explorer 5.0X and above Note The embedded web server can be accessed from any operating system that supports the TCP/IP protocol and a web browser. The embedded web server does not support IPX-based network printer connections and cannot be accessed with a parallel cable. You cannot view the embedded web server pages from outside a firewall. Viewing the HP Embedded Web Server 1. Launch your web browser. 2. In the Address: or Go to: field, type the IP address assigned to the printer (for example: http://192.168.1.1) or the host name (for example: http://myprinter). If you do not know the IP address for the printer, it is listed on the printer configuration page under Protocol Information in the TCP/IP section. To print a configuration page: a. On the printer control panel, press Menu until INFORMATION MENU displays. b. Press Item until PRINT CONFIGURATION displays. c. Press Select to print the configuration page. After the process is completed, the printer will return to the READY state. Introducing the HP Embedded Web Server 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Introducing the HP Embedded Web Server
7
Accessing the HP Embedded Web Server
System Requirements
To use the HP Embedded Web Server, you must have the following:
•
a TCP/IP-based network
•
a web browser installed on your computer, preferably either Netscape
Navigator 4.7X or Microsoft Internet Explorer 5.0X and above
Note
The embedded web server can be accessed from any operating system
that supports the TCP/IP protocol and a web browser.
The embedded web server does not support IPX-based network printer
connections and cannot be accessed with a parallel cable.
You cannot view the embedded web server pages from outside a firewall.
Viewing the HP Embedded Web Server
1.
Launch your web browser.
2.
In the
Address:
or
Go to:
field, type the IP address assigned to the
printer (for example: http://192.168.1.1) or the host name (for example:
http://myprinter).
If you do not know the IP address for the printer, it is listed on the
printer configuration page under Protocol Information in the TCP/IP
section.
To print a configuration page:
a.
On the printer control panel, press
Menu
until INFORMATION
MENU displays.
b. Press
Item
until PRINT CONFIGURATION displays.
c.
Press
Select
to print the configuration page. After the process is
completed, the printer will return to the READY state.